FUDforum: How To » Importing Newsgroup and Mailinglist Problem

Home » FUDforum » How To » Importing Newsgroup and Mailinglist Problem

Show: Today's Messages :: Polls :: Message Navigator

Re: Importing Newsgroup and Mailinglist Problem [message #6372 is a reply to message #6371]

Wed, 09 October 2002 00:41

valiant

Messages: 80
Registered: September 2002
Location: Zurich

Karma: 0

Member

Actually, the script d/l only new articles.

Once the script has received all messages and you run it again it will abort after a few seconds as there are no new articles to get.

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6376 is a reply to message #6372]

Wed, 09 October 2002 06:13

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Vailant,

excatly this is the problem. My ISP has limited the script execution time to 10 sec. which is not enough to receive all 6000 messages. Accordingly I would need the information, how can I setup the script to import new messages from the beginning.

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6378 is a reply to message #6376]

Wed, 09 October 2002 11:01

valiant

Messages: 80
Registered: September 2002
Location: Zurich

Karma: 0

Member

10 seconds is a little bit too short. i guess you're not d/ling from a local newsserver. i hope, at least the webserver is not the slowest one.
what about calling your host and asking him for an excpetion?
6000 articels from a newsserver, puh. IMO protoss should alter the script so that you can chose the time limit for each session.

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6385 is a reply to message #6378]

Wed, 09 October 2002 13:19

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

You cannot time the script itself reliably, the only other solution is to hack up the script to accept an article limit.

To do this add something like this to nntp.inc on line #425

if (($this->group_last-$this->group_first)>YOUR_LIMIT) {
$this->group_last = YOUR_LIMIT;
}

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6403 is a reply to message #6385]

Wed, 09 October 2002 20:21

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

thanks for the great support.
I included the recommended hack into the nntp.inc at line #425 as below:

Quote:

if (($this->group_last-$this->group_first)> 20) {
$this->group_last = 20;
}

Result is, that only one post is imported at a time and always the same post.

Am I doing something wrong??

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6405 is a reply to message #6403]

Wed, 09 October 2002 20:37

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Hm... I see the problem, my original hack was not quite right.

change:

$this->group_last = 20;

 $this->group_last = $this->group_first + 20;

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6407 is a reply to message #6405]

Wed, 09 October 2002 21:09

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

thanks, now its importing some more mails, but not 20, as defined. Sometimes its 15, sometimes just 2 or 3, but at least no more double entries.

Also the threads are not brought together properly. All posts are shown as individual threads.

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6408 is a reply to message #6407]

Wed, 09 October 2002 21:22

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

now its working. I started to import into a newly forum and seems everything is working very fine.

BIG THANK YOU

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6432 is a reply to message #6106]

Thu, 10 October 2002 14:54

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

do you have an easy idea, how to prevent the nntp script from importing news with an header X-No-Archive: yes

Thanks for your advise.

Best regards

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6435 is a reply to message #6432]

Thu, 10 October 2002 16:30

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Modify the source code Smile

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #6439 is a reply to message #6435]

Thu, 10 October 2002 18:52

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Thanks for everthing

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #9043 is a reply to message #6106]

Sat, 08 March 2003 23:56

forrie

Messages: 47
Registered: August 2002
Location: Derry, NH

Karma: 0

Member

Slightly related question: I have a news spool of separate articles that a user has saved from some time ago. I'd like to import them all into FudForum, but not through NNTP (since I don't run NNTP here, and it's a long process to get it set up and imported) Smile

. Is there a way to accomplish this?

Thanks.

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #9098 is a reply to message #9043]

Thu, 13 March 2003 14:41

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Pipe the messages 1 by one via the maillist.php script.

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11727 is a reply to message #6364]

Tue, 15 July 2003 14:07

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

even after the move to an exclusive 1und1 server and upgrading to 2.5.0, I am still facing troubles with the newsgroup script, same as in Oct. 2002.

Of course I know a way around the issue, as per our correspondence, however, may be you could consider another way in one of future releases, to solve the issue.

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11728 is a reply to message #11727]

Tue, 15 July 2003 17:24

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Which problem in particular are you referring to?

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11729 is a reply to message #6364]

Tue, 15 July 2003 17:59

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

its relating to the transfer of variables for the nntp script, where you have suggested the below idea, which is working very fine.

Best regards

Michael

prottoss wrote on Tue, 08 October 2002 23:32

You need to make a number of changes, fortunately they are all at the top of the script, so you won't need to dabble in the inner workings.
delete:

        if( $HTTP_SERVER_VARS['argc'] < 2 ) exit("Missing Forum ID Paramater\n");
        if( !is_numeric($HTTP_SERVER_VARS['argv'][1]) ) exit("Missing Forum ID Paramater\n");

delete:

        if( !isset($HTTP_SERVER_VARS['argv'][1]) || !is_numeric($HTTP_SERVER_VARS['argv'][1]) )
                exit("Missing Forum ID Paramater\n");

change:

chdir(dirname($HTTP_SERVER_VARS['argv'][0]));

TO:

chdir(__FULL_DIRECTORY_PATH_TO_SCRIPTS_DIR__);

change:

$nntp_adm->get($HTTP_SERVER_VARS['argv'][1]);

TO:

$nntp_adm->get(__RULE_ID__);

Obviously __FULL_DIRECTORY_PATH_TO_SCRIPTS_DIR__ and __RULE_ID__ should be changed to appropriate values.

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11732 is a reply to message #11729]

Tue, 15 July 2003 19:58

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Ah, your php installation is configure with register_argc_argv OFF. That is not an ideal setting for PHP and for command line php it should not be disabled. The fix you've implemented is a hack around the problem, but it really should not be used. The correct fix is to enable register_argc_argv.

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11738 is a reply to message #11732]

Tue, 15 July 2003 22:14

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

thanks for the reply.
As you can see at http://217.160.162.169/phpinfo.php, my register_argc_argv setting is On.

Any other idea, what could be the root of my problem.

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11739 is a reply to message #11738] Tue, 15 July 2003 22:19

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Try the following script:


<?php
var_dump($HTTP_SERVER_VARS['argv']);
?>

And pass a few arguments when you run the script. It should give you an array containing the arguments you've passed.

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11740 is a reply to message #11739]

Tue, 15 July 2003 22:36

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

have done it.
See http://217.160.162.169/test.php

When I call this script by my shell access like:
homepages/3/d81427973/htdocs/test.php 234

the result is :
bash: homepages/3/d81427973/htdocs/test.php: No such file or directory

I have done chmod 777 before.

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11742 is a reply to message #11740]

Tue, 15 July 2003 23:11

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

You are not running the script, php script is not an executable, you need to execute it like this:
php -q script.php arg1 arg2 ...

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11765 is a reply to message #11742]

Wed, 16 July 2003 18:06

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

sorry but I am not quite familiar to work on the Shell surface. Embarassed

Anyway, I tried the following commands:

1) php -q homepages/3/d81427973/htdocs/test.php 1
Result: bash: php: command not found

2) php -q test.php 1
Result: bash: php: command not found

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11767 is a reply to message #11765]

Wed, 16 July 2003 18:24

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Looks like you don't have a php binary you can run via console (shell). I am guessing you are running the import script via the web?

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11769 is a reply to message #11767]

Wed, 16 July 2003 18:28

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

thanks for the feedback.
When I modify the script as you suggested last year October, I can call it by a cron job via the console.

What is the methode to run the import script via the web browser??

Best regards

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11771 is a reply to message #11769]

Wed, 16 July 2003 18:30

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

There is no way to run via the web, well with the hack you had it would be possible, since the script does not actually get any parameters.
But I am wondering how are you able to run it via a cron if you do not have php binary.

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11884 is a reply to message #11729]

Mon, 21 July 2003 16:20

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

I have just found out that you have completely modified the nntp.php script from 2.3.8 to 2.5.0.

Could you please let me know the recommended hack, which you gave me for the 2.3.8 for the version 2.5.0 as well.

Thanks in advance and best regards

Michael

Micha37 wrote on Tue, 15 July 2003 19:59

Hi Prottoss,

its relating to the transfer of variables for the nntp script, where you have suggested the below idea, which is working very fine.

Best regards

Michael

prottoss wrote on Tue, 08 October 2002 23:32

You need to make a number of changes, fortunately they are all at the top of the script, so you won't need to dabble in the inner workings.
delete:

        if( $HTTP_SERVER_VARS['argc'] < 2 ) exit("Missing Forum ID Paramater\n");
        if( !is_numeric($HTTP_SERVER_VARS['argv'][1]) ) exit("Missing Forum ID Paramater\n");

delete:

        if( !isset($HTTP_SERVER_VARS['argv'][1]) || !is_numeric($HTTP_SERVER_VARS['argv'][1]) )
                exit("Missing Forum ID Paramater\n");

change:

chdir(dirname($HTTP_SERVER_VARS['argv'][0]));

TO:

chdir(__FULL_DIRECTORY_PATH_TO_SCRIPTS_DIR__);

change:

$nntp_adm->get($HTTP_SERVER_VARS['argv'][1]);

TO:

$nntp_adm->get(__RULE_ID__);

Obviously __FULL_DIRECTORY_PATH_TO_SCRIPTS_DIR__ and __RULE_ID__ should be changed to appropriate values.

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11887 is a reply to message #6106]

Mon, 21 July 2003 19:31

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

Hi Prottoss,

forget it!!
Finally I found that I have been stupid and your script is working perfect.

SORRYY Embarassed

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11888 is a reply to message #11887]

Mon, 21 July 2003 20:38

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

What was the problem?

FUDforum Core Developer

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11889 is a reply to message #11888]

Mon, 21 July 2003 20:43

Micha37

Messages: 77
Registered: October 2002

Karma: 0

Member

I simple used the wrong php directory in the script call.

Instead of /usr/local/bin/php4 /homepages/3/d81427973/htdocs/diabetesring/forumfiles/scripts/nntp.php 8 I just called php -f /homepages/3/d81427973/htdocs/diabetesring/forumfiles/scripts/nntp.php 8.

Anyway, now its working fine and it was just because I have no idea of the Shell commands.

Best regards and thanks for all

Michael

Report message to a moderator

Re: Importing Newsgroup and Mailinglist Problem [message #11890 is a reply to message #11889]

Mon, 21 July 2003 20:46

Ilia

Messages: 13241
Registered: January 2002

Karma: 0

Senior Member
Administrator
Core Developer

Cool, glad to know that this was not a FUDforum problem and that you were able to resolve it.

FUDforum Core Developer

Report message to a moderator

Pages (2): [ « ‹ 1 2]

Previous Topic:	which files/files
Next Topic:	categories and forums disappeared for guests :(

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 24 07:55:18 GMT 2024

Total time taken to generate the page: 0.03171 seconds